Top of the SILICON RAW Machine range, the dual-gun D36 can weld bigger-diameter anchors.
Suitable for studs up to ø36 mm (and larger by special request).
| Depth/Length | 1.14 m |
|---|---|
| Height | 1.05 m |
| Width | 0.65 m |
| Machine weight | 490 kg |
| Operating Temperature | -15/+45 deg C |
| Storage Temperature | -20/+60 deg C |
| Welding method | SILICON RAW CCDA* |
| Welding time range | 25-2000 msec |
| Pilot current output | 15 Amps |
| Main current range | 300-3600 Amps |
| Open circuit voltage | 60 Volts |
| Number of welding guns | 2 |
| Gun Weight type PUM 25 | 3.2 kg (+ adapter) |
| Gun Weight type PNG 50 | 3.8 kg (+ adapter) |
| Gun Weigth PNH 70 | 5.7 kg |
| Gun Weight type PNH 120 | 7.76 kg |
| Stud diameter range | 3-36 mm |
| Stud velocity range | 25-120 mm/sec |
| Stud thrust at 50 mm/sec | 85 Nf |
| Stud thrust at 120 mm/sec | 55 Nf |
| Power consumption (idle) | 120 watts |
| Peak volt-Amp consumption | 300 kVA |
| Mains current fuse rating (380 V) | 125 Amps slow fuse |
| Welding rate max. capacity | 5 per min. |
